Choose your new BMW at Cannon Motorcycles

Engine

Type Oil/watercooled 4-stroke in-line 6-cylinder engine, two overhead camshafts, four valves per cylinder
Bore x stroke 72mm x 67.5mm
Capacity 1,649cc
Rated output 160hp at 7,750rpm
Max. torque 175 Nm at 5,250rpm
Compression ratio 12.2:1
Mixture control / engine management Electronic intake pipe injection, digital engine management (BMS-X)
Emission control Closed loop 3-way catalytic converter, emission standard EU-3

Performance / fuel consumption

Maximum speed Over 200km/h
Fuel consumption per 100 km at constant 90 km/h 4.6L
Fuel consumption per 100 km at constant 120 km/h 5.9L
Fuel type Unleaded super, octane 95 (RON)

Electrical System

Alternator three-phase alternator 580 W
Battery 12 V/19 Ah, maintenance free

Power transmission

Clutch Multiple disc clutch in oil bath
Gearbox 6-speed, helical, gearbox
Drive Cardan Shaft

Chassis / brakes

Frame Bridge-type frame, cast aluminium, load-bearing engine
Front wheel location / suspension BMW Motorrad Duolever; central spring strut
Rear wheel location / suspension
Suspension travel front / rear 125mm/135mm
Wheelbase 1,680mm
Castor 108.4mm
Steering head angle 62.2 degree
Wheels Aluminium
Rim, Front 3.50 x 17"
Rim, rear 6.00 x 17"
Tyre, front 120/70 ZR17
Tyre, rear 190/55 ZR17
Brake, front Dual disc brake, diameter 320mm, 4-piston fixed calipers
Brake, rear Single disc brake, diameter 320mm, double piston caliper
ABS BMW Motorrad Integral ABS (part-integral) as Standard.

Dimensions / weights

Length 2,489mm
Width (incl. mirrors) 1,000mm
Height (excl. mirrors) 1,465mm
Seat height, unladen weight 750mm (high seat bench: 780mm)
Inner leg curve, unladen weight 1,720mm (high seat bench: 1,770mm)
Unladen weight, road ready, fully fueled 348kg
Dry weight 321kg
Permitted total weight 560kg
Payload (with standard equipment) 212kg
Usable tank volume 26.5L
Reserve 4L
Choose your new BMW at Cannon Motorcycles